收藏晋升泰|英文官网|网站地图|晋升泰简介HI,欢迎来到晋升泰精密(深圳)有限公司官方网站!

热门关键词:紧固件生产厂家紧固件定制紧固件紧固件紧固件

强大的客户服务实力
当前位置:首页 > 资讯·技术 > 紧固件资讯 »>>紧固件厂家 晋升泰 紧固件类别

紧固件厂家-晋升泰为您介绍紧固件的十大类别

文章出处:人气:0发表时间:2017-10-10【 返回列表

标准紧固件共分十大类,今天紧固件厂家晋升泰来为您介绍。紧固件选用时应按标准紧固件的使用场合和其使用功能进行确定。

紧固件厂家 晋升泰精密(深圳)有限公司.jpg

  1、螺栓bolt:螺栓一般与螺母(通常再加一个垫圈或两个垫圈)相配,用于起连接和紧固作用的场合。The bolts are generally fitted to the nut (usually with a washer or two washers) for the purpose of connection and fastening.

  2、螺母Nuts:螺母与螺栓相配使用。Nuts are used in conjunction with bolts.

  3、螺钉Screw:螺钉通常是单独(有时加垫圈)使用,一般起紧固或紧定作用。Screws are usually used alone (sometimes with gaskets), and are generally fastened or tightened.

  4、螺柱Studs:螺柱一般为两端都带有螺纹(单头螺柱为单端带螺纹),通常将一头罗纹牢固拧入部件机体中,另一端与螺母相配,起连接和紧固的作用,但在很大程度上还具有定距的作用。The studs are generally threaded at both ends (single-ended studs are single-ended with threads). Typically, a rib is firmly screwed into the body of the body and the other end is matched to the nut. It acts as a connection and fastening. To a large extent also has a fixed role.

  5、垫圈washer:垫圈放在螺栓、螺钉和螺母等的支承面与工艺支承面之间使用,起防松和减小支承面应力的作用。The gasket is used between the support surface of bolts, screws and nuts and the process bearing surface to prevent and reduce the stress of the bearing surface.

  6、自攻螺钉Tapping screws:与自攻螺钉相配的工件螺孔不需预先攻丝,在拧入自攻螺钉的同时,使内螺纹成型。And the tapping screw to match the workpiece screw hole without pre-tapping, screwed into the tapping screw at the same time, so that the internal thread forming.

  7、铆钉rivet:铆钉一端有头部,且杆部无螺纹。使用时将杆部插入被连接件的孔内,然后将杆的端部铆紧,起连接或紧固作用。The rivet has a head at one end and no threads on the stem. When used, insert the stem into the hole of the connector, and then rivet the end of the rod, from the connection or fastening effect.

  8、销pin:销在使用时镶如入工件内,通常起连接或定位作用。In the use of the pin in the workpiece, usually from the connection or positioning role.

  9、挡圈Retaining ring:挡圈通常在轴上或孔内,起限制工件轴向的作用。The retaining ring is usually in the shaft or hole, which limits the axial effect of the workpiece.

  10、木螺钉Wood screws:木螺钉用于拧入木材,起连接或紧固作用。Wood screws are used to screw into the wood, from the connection or fastening effect.

以上就是紧固件厂家晋升泰为您带来的紧固件的十大类别,希望对您有所帮助。

快捷通道/ PRODUCTS
非标紧固件
定位销 圆柱销 螺丝/螺栓 衬套 支柱 轴环 螺母 垫圈 浮动接头 小径弹簧柱塞
紧固件资讯
公司新闻 紧固件资讯 常见问题
关于晋升泰
公司环境 激情团队 荣誉证书 展会参展
晋升泰首页|非标定位销|非标圆柱销|非标轴套|常见问题|展会参展|荣誉证书|联系晋升泰|晋升泰简介
'); })();