收藏晋升泰|英文官网|网站地图|晋升泰简介HI,欢迎来到晋升泰精密(深圳)有限公司官方网站!

热门关键词:紧固件生产厂家紧固件定制紧固件紧固件紧固件

强大的客户服务实力
当前位置:首页 > 资讯·技术 > 紧固件资讯 »>>深圳螺丝厂家讲解自攻螺丝与机牙螺丝的区别

深圳螺丝厂家讲解自攻螺丝与机牙螺丝的区别

文章出处:人气:0发表时间:2017-11-02【 返回列表

螺丝为日常生活中不可或缺的工业必需品:如手机、照相机、眼镜、钟表、电子等使用之极小螺丝;电视、电气制品、乐器、家具等之一般螺丝;至于工程、建筑、桥梁则使用大型螺丝、螺帽;交通器具、飞机、电车、汽车等则为大小螺丝并用。螺丝在工业上负有重要任务,只要地球上存在着工业,则螺丝之功能永远重要。Screws for the daily life of indispensable industrial necessities: such as mobile phones, cameras, glasses, watches, electronics and other small screws; TV, electrical products, musical instruments, furniture and other general screws; as engineering, construction, bridges are used Large screws, nuts; transport equipment, aircraft, trams, cars, etc. for the size of the screw and use. Screws have an important task in industry, and as long as there is industry on earth, the function of screws is always important.

 

自攻螺丝 晋升泰精密(深圳)有限公司.jpg


 

  而在螺丝应用种类中,自攻螺丝钉和机丝螺丝是不一样的,应按需选用。下面深圳讲解五金螺丝厂家就来说说自攻螺丝钉和机丝螺丝的区别。In the screw application category, self-tapping screws and machine screw is not the same, should be selected on demand. Shenzhen, the following hardware manufacturers to explain the screw on the screw and the difference between the screws.


 

  1、自攻螺丝钉Self-tapping screws:与机器螺钉相似,但螺杆上的螺纹为专用的自攻螺丝钉用螺纹。用于紧固连接两个薄的金属构件,使之成为一件整体,构件上需要事先制出小孔,由于这种自攻螺丝钉具有较高的硬度,可以直接旋入构件的孔中,使构件孔中形成相应的内螺纹。这种连接形式也属可拆卸连接。Similar to the machine screw, but the thread on the screw is a special self-tapping screw thread. Used to fasten the connection of two thin metal components, making it a whole, the components need to make a small hole in advance, because of this self-tapping screws with high hardness, can be directly screwed into the hole in the component, so that The corresponding internal thread is formed in the member hole. This connection is also a detachable connection.


 

  2、机牙螺丝钉主要用于一个带有内螺纹孔的零件,与一个带有通孔的零件之间的紧固连接,不需要螺母配合(这种连接形式称为螺钉连接,也属可拆卸连接;也可以与螺母配合,用于两个带有通孔的零件之间的紧固连接。紧定螺丝钉主要用于固定两个零件之间的相对位置。The female screw is mainly used for a fastened connection with a threaded hole in a part with an internal thread, which does not require a nut fit (this type of connection is called a screw connection and is also detachably connected; It can also be used with nuts for fastening connections between two parts with through-holes, which are mainly used to hold the relative position between the two parts.

 

晋升泰精密(深圳)有限公司是专业从事异型紧固件产品研发与制造定制加工的高新技术企业,自2009年成立以来,公司一直秉承质量第一、服务第一、专注专业的信念。把客户需求和技术创新放在企业发展的首位,凭借卓越团队、先进的设备和完善的质量管理体系,为客户快速提供高品质、低成本的精密零件。“JST晋升泰”致力于为紧固件行业的发展助一臂之力。

 

以上就是哦深圳螺丝厂家晋升泰精密(深圳)有限公司为您讲解的自攻螺丝和机牙螺丝的区别,希望对您有所帮助。

 

快捷通道/ PRODUCTS
非标紧固件
定位销 圆柱销 螺丝/螺栓 衬套 支柱 轴环 螺母 垫圈 浮动接头 小径弹簧柱塞
紧固件资讯
公司新闻 紧固件资讯 常见问题
关于晋升泰
公司环境 激情团队 荣誉证书 展会参展
晋升泰首页|非标定位销|非标圆柱销|非标轴套|常见问题|展会参展|荣誉证书|联系晋升泰|晋升泰简介
'); })();