收藏晋升泰|英文官网|网站地图|晋升泰简介HI,欢迎来到晋升泰精密(深圳)有限公司官方网站!

热门关键词:紧固件生产厂家紧固件定制紧固件紧固件紧固件

强大的客户服务实力
当前位置:首页 > 资讯·技术 > 紧固件资讯 »>>冲压模具导柱导套之间的间隙应该是多少最好?

冲压模具导柱导套之间的间隙应该是多少最好?

文章出处:人气:0发表时间:2017-11-10【 返回列表

 

导向零件导柱导套是应用最广泛的一种导向零件。其作用是保证凸凹模在冲压工作时有精确的配合间隙。To the part guide column and guide sleeve is the most widely used a guide parts. Its role is to ensure that the punch and die in the stamping work with a precise gap.因此,导柱、导套的间隙应小于冲裁间隙。Therefore, the guide column, guide sleeve gap should be less than the blanking gap.今天晋升泰为您讲解冲压模具导柱导套之间的间隙应该多少最好。
 
导柱导套 晋升泰精密(深圳)有限公司.jpg
 
考虑到导套导柱的位置误差,一般双导柱的间隙为0.02-0.04,四导柱的间隙为0.03-0.05内导柱固定板间隙0.008,内导套一般都放0.04 外导柱0.000外导套0.04为了保证凸凹模的精确配合间隙,一般T在0.3-0.5mm时,内导柱公差-0.01至-0.015,内导套公差0至-0.005。Taking into account the position of the guide pin guide position error, the general double guide column clearance is 0.02-0.04, the four guide column clearance is 0.03-0.05 within the guide column fixed plate clearance 0.008, the guide sleeve are generally put 0.04, Outer guide sleeve 0.04 In order to ensure the precise fit of the convex and concave mold gap, the general T in the 0.3-0.5mm, the internal guide tolerance -0.01 to -0.015, the tolerance within the guide 0 to -0.005.T在0.1-0.3mm时,内导柱公差0至-0.002,内导套公差0.003至0.005。以上为薄料选用原则。T in the 0.1-0.3mm, the guide column tolerance 0 to -0.002, within the guide tolerance 0.003 to 0.005. Above for the selection of thin material principle.
 
外导组件,以滚珠导柱组件,当然是买标准件,过盈量在0.01-0.02mm。Outside the components to ball guide column components, of course, is to buy standard parts, the amount of interference in the 0.01-0.02mm.导向零件导柱和导套是应用最广泛的一种导向零件。Guide parts Guide leads and guide sleeves are the most widely used guide parts.其作用是保证凸凹模在冲压工作时有精确的配合间隙因此,导柱、导套的间隙应小于冲裁间隙。Its role is to ensure that the convex and concave die in the stamping work with a precise gap, therefore, guide column, guide sleeve gap should be less than the blanking gap.
 
以上就是就是冲压模具导柱导套的间隙的知识,希望对您有所帮助。
 
 
快捷通道/ PRODUCTS
非标紧固件
定位销 圆柱销 螺丝/螺栓 衬套 支柱 轴环 螺母 垫圈 浮动接头 小径弹簧柱塞
紧固件资讯
公司新闻 紧固件资讯 常见问题
关于晋升泰
公司环境 激情团队 荣誉证书 展会参展
晋升泰首页|非标定位销|非标圆柱销|非标轴套|常见问题|展会参展|荣誉证书|联系晋升泰|晋升泰简介
'); })();